Onkyo DTR-7.9 Stereo Receiver User Manual


 
103
Advanced Setup—Continued
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
This section explains items on the “Source Setup” menu.
Items can be set individually for each input selector.
IntelliVolume
With IntelliVolume, you can set the input level for each
input selector individually. This is useful if one of your
source components is louder or quieter than the others.
Use the Left and Right [ ]/[ ] buttons to set the level.
If a component is noticeably louder than the others, use
the Left [ ] button to reduce its input level. If it’s notice-
ably quieter, use the Right [ ] button to increase its
input level. The input level can be adjusted from 12 dB
to +12 dB in 1 dB steps.
Note:
IntelliVolume does not apply for Zone 2.
5
When you’ve finished, press the
[Setup] button.
The setup menu closes.
Source Setup
1
Remote
controller
Press the input selector buttons
to select an input source, and
then press the [Receiver] button.
2
Press the [Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
3
Use the Up and Down [ ]/[ ] but-
tons to select “4. Source Setup”,
and then press [Enter].
The “Source Setup” menu appears. The
name of the currently selected input
selector is displayed in a box.
4. Source Setup
1. IntelliVolume
2. A/V Sync
3. Name Edit
4. Picture Adjust
DVD
4
Use the Up and Down [ ]/[ ] but-
tons to select an item, and then
press [Enter].
5
Use the Left and Right [ ]/[ ]
buttons to change it.
The “Source Setup” menu items are
explained below.
6
When you’ve finished, press the
[Setup] button.
The setup menu closes.