Filter
Top Products
53
The process of defining a more “virtual” button is the same as that for a normal
button, with two exceptions:
• since it is only a virtual button, you cannot access the define button
menu by the press-and-hold shortcut;
• similarly, since there is no simple way to force migration between
multiple audio connections, more buttons can accept only a single
audio connection.
To define a
more button, navigate through the menu system as you normally do,
down the hierarchy along the path main menu/setup/set more buttons. Then
pick a button (more 1, more 2, etc.) and define it as you would any other.
Once you have saved your “virtual button” definition, you may access it by press-
ing the more button on the front panel, or by cycling through the appropriate in-
puts from the remote (either video or audio). If you set up more than one virtual
button, pressing the more button repeatedly will cycle among them.
set speakers Having set up all of your sources, the next step is to tell the AVP2 more about
the speakers in the system. This allows the AVP2 to tailor its performance to the
needs and capabilities of your loudspeakers. Adjustments include (see next
page):