Filter
Top Products
Placement
Before you install the Home Theater Standard into your system, review the following
guidelines to choose the location for the component. This will facilitate a clean, trouble-
free installation.
The Home Theater Standard does not require any type of special rack or cabinet for
installation. For the dimensions of your Home Theater Standard see Specifications, on
pages 59-60.
The Home Theater Standard requires at least two inches (5 cm) of clearance on each
side and at least two inches (5 cm) of clearance above and below the component
provide adequate ventilation. Further, the Home Theater Standard requires at least
three inches (7 cm) of clearance between other connected components. For
installations inside cabinetry, extra ventilation may be necessary.
AC POWER GUIDELINES
The Home Theater Standard has superb regulation and does not require a dedicated
AC circuit. Avoid connections through extension cords or multiple AC adapters. High
quality 15 amp grounded AC strips are acceptable. High quality AC line conditioners or
filters may be used if they are grounded.
Power Cord
The Home Theater Standard should be used only with the power cord supplied. Contact
your authorized Krell dealer, distributor, or Krell before using any devices designed to
alter or stabilize the AC power for the Home Theater Standard.
4
Krell Home Theater Standard