Filter
Top Products
Back Panel Description
See Figure 2 on page 13
The back panel of the Home Theater Standard provides all input and output
connections, remote control inputs and outputs, power on and off, and power
connection. The back panel functions are described below.
Analog Audio Outputs and Inputs
32 Balanced Analog Audio Outputs
The Home Theater Standard is equipped with six balanced analog audio channel
outputs, with XLR connectors, for the left, center, right, left rear, right rear, and
subwoofer.
33 Single-ended Analog Audio Outputs
The Home Theater Standard is equipped with six single-ended analog audio channel
outputs, with RCA connectors, for the left, center, right, left rear, right rear, and
subwoofer.
34 Multi-Channel Audio Output Connector
The Home Theater Standard is equipped with a multi-channel audio output, with a DB-
25 connector, which contains the output connections for all the output channels (left,
center, right, left rear, right rear, and subwoofer).
35 B-1 Left and Right Inputs
The Home Theater Standard is equipped with one set of balanced inputs with
connectors.
The XLR pin configurations are as follows:
Pin 1: Shield (ground)
Pin 2: Non-inverting (0
°)
Pin 3: Inverting (180
°
)
36 Tape In Left and Right
The Home Theater Standard is equipped with one set of single-ended tape inputs with
RCA connectors.
37 Tape Out Left and Right
The Home Theater Standard is equipped with one set of single-ended tape outputs with
RCA connectors.
38 VCR1 In Left and Right
The Home Theater Standard is equipped with one set of single-ended inputs with RCA
connectors, for a VCR audio source.
14 Krell Home Theater Standard