Filter
Top Products
Note
If the selected device has both digital and analog outputs, use the digital outputs for the
main zone, and the analog outputs for zone 2.
To use an analog input only, set the digital input to UNASSIGNED.
If both analog and digital are unassigned, the last settings will stay selected when you
switch to this device.
Assign Analog Input
If you select ANALOG, the ASSIGN ANALOG INPUT screen appears:
KRELL HTS
-ASSIGN ANALOG INPUT-
DVD
OK
PRESS ENTER AND
USE 1",[, TO SWITCH
BETWEEN ANALOG INPUTS
When this screen appears, you see the blinking cursor at s-1. To select another analog
device option (S-l, s-2, s-3, s-4, s-5, TAPE, VCR1, UNASSIGNED, B-l), follow directions at
the bottom of the screen. Select the UNASSIGNED analog input option if the selected
device does not use an analog output, for example, a CD player. Press enter (83)
confirm this setting.
After you have selected the desired analog input, select OK and press enter (83). You
return to the CONFIGURE AUDIO INPUT screen.
Krell Home Theater Standard 35