Filter
Top Products
When you enter this screen, you see the blinking cursor at DVD. To select another option
(LD, SAT, VCR, TV, CD, TUNER, AUX1, AUX2, TAPE), press enter (83), then use 1" $ keys (80)
to scroll through the options. Press enter (83). The DVD TRIM ADJUSTMENT screen
appears:
KRELL HTS
-DVD TRIM ADJUSTMENT-
I’ 0dB~
OK
PRESS ENTER AND
USE 1" $ TO CHANGE
DEVICE TRIM
The flashing cursor is on the 0 dR. Press enter (83), then use 1" $ keys (80) to select
appropriate trim adjustment (range is from -15 dB to +15 dR). Press enter (83) to
the selection.
Select OK and press enter (83). You return to the SELECT DEVICE screen. Select OK and
press enter (83). You return to the LEVEL ADJUSTMENTS screen.
Select Analog Input Trim
IMPORTANT
An analog device must be selected for this option to function.
The ANALOG INPUT TRIM screen is used to measure the level of an analog input source to
the Home Theater Standard. When the ANALOG INPUT TRIM screen appears an upwardly
pulsing graphic meter is displayed. This meter is an on-screen equivalent of a signal
gain monitor.
KRELL HTS
-ANALOG INPUT TRIM-
DVD $1
0dR
I
-2 dB
-4 dB
-6 dB
INPUT ANTI
GAIN 0dR
CLIP ON
42 Krell Home Theater Standard