Filter
Top Products
KRELL HTS
-PROGRAM REMOTE MODE-
ONLY ~’AND ,J, SAVE AND
RECALL ARE ALLOWED
ON FRONT PANEL. REMOTE
INPUT IS INACTIVE. PRESS ENTER
TO CONTINUE
OK
Note
The infrared sensor on the front panel is rendered inactive until programming is
complete.
1. Use the 1" 4. keys (80) to select START on the PROGRAM REMOTE screen and press
enter (83).
2.
Press the front panel level buttons (30) to select a command (commands appears
the front panel display).
3. Place the programmable remote in program mode (see learning remote user
manual).
Place the infrared sensor of the programmable remote so that it faces the infrared
emitter (17) on the Home Theater Standard front panel.
5.
Press and hold the save button (29) on the Home Theater Standard front panel until
the programmable remote has learned the code. (See your remote’s user manual for
information on time needed).
6. Repeat steps 2 through 5 for as many commands as desired.
7. Press the recall button (31) on the front panel to exit the program mode.
When all remote control programming is finished, press the menu key (81) to return
the main menu.
¸4.
Krell Home Theater Standard 49