Filter
Top Products
AV1 Setup
3-41
BASS PEAK LIMITER
Opens the BASS PEAK LIMITER menu, which is used to set ampli-
tude limits for all speakers to which low frequencies are redirected,
including the subwoofer.
The AV1 is equipped with an internal limiter that prevents low-fre-
quency output signals from exceeding a designated level. This is
essential for Dolby Digital and DTS(-ES) input sources that produce
low-frequency peaks at much higher levels than 2-channel sources.
In home theaters, the subwoofer and its associated amplifier might
not be able to reproduce these levels without overloading.
CAL NOISE ON, OFF
Determines whether the bass peak limiter is set with an internal or
external source. When ON, the AV1 activates an internal calibration
noise signal to set the limiter. When OFF, the AV1 deactivates the
internal calibration noise test signal. An external calibration source
such as an audio calibration disc is required to generate a noise sig-
nal to set the bass peak limiter.
Parameter
Default
Setting
Possible
Settings
CAL NOISE ON ON, OFF
LIMITER ON ON, OFF
LIMIT ADJ 100dB 75dB to 120dB
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
C
R SR RR
L SL RL
M
SUB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
LEVELS CALIBRATION
INTERNAL NOISE TEST
EXTERNAL NOISE TEST
BASS PEAK LIMITER
BASS PEAK LIMITER
CAL NOISE
LIMITER
LIMIT ADJ
!CAUTION!
HIGH AUDIO LEVELS
ON
ON
100dB
ON
OFF
SPEAKERSSETUP
LEVELS CALIBRATION
BASS PEAK LIMITER
SPEAKERSSETUP
LEVELS CALIBRATION
BASS PEAK LIMITER
CAL NOISE