Filter
Top Products
AV1 Setup
3-9
ANLG IN LVL
Opens the ANLG IN LVL menu, which adjusts 2-channel analog
audio input levels for the selected input. Despite attempts at stan-
dardization, analog audio sources have a wide range of levels. To
compensate for this, the AV1 allows independent input level adjust-
ment for each of its stereo analog audio input connectors. Input
level adjustment is not available for either of the 5.1-
channel analog audio input connectors.
Note:
Adjustments made on the ANLG IN LVL menu are applied to the stereo
analog audio input connector assigned for the selected input. When
another stereo analog audio input connector is assigned, these adjust-
ments are automatically applied to the new connector.
AUTO ON, OFF
Provides automatic adjustment of 2-channel analog audio input
levels. When set to ON, the AV1 automatically monitors and opti-
mizes input levels. When the input signal is too high, the AV1
quickly decreases input levels to avoid overload. When the input
signal is too low, the AV1 slowly increases input levels to maximize
signal-to-noise ratio and dynamic range.
When the AUTO parameter is OFF, the AV1 does not provide auto-
matic adjustment of 2-channel analog audio input levels. Rather,
input levels must be adjusted with the ANLG IN LVL MANUAL
parameter (next page).
ON
OFF
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
ADVANCED
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
DVD1 ANLG IN LVL
AUTO
RL
AUTO GAIN
ON
+0.0dB
+0.dBMANUAL
dB
0
-6
-15
-30
-45
INPUTSSETUP
DVD1
ANGL IN LVL
INPUTSSETUP
DVD1
ANGL IN LVL
AUTO