Filter
Top Products
AV1 Basic Operation
2-15
If the STATUS menu includes a second page, the PG1 indicator
appears in the top-right corner of the menu. While pressing the
S1 button, press and release the Stat button to open the sec-
ond page. If the STATUS menu does not include a second page,
pressing and releasing the Stat button closes the menu. If this
occurs, begin again with step 1.
3. When the desired STATUS menu page has been opened,
release the S1 button to deactivate the Shift command bank.
4. Press the remote control Menu and arrows to scroll up or
down through the list of available parameters. When the Shift
command bank is activated, the Menu arrows cannot be used
to scroll through STATUS menu parameters.
5. Press the Stat button or the Menu arrow to close the STA-
TUS menu. If the second page of the STATUS menu opens,
press the Stat button or the Menu arrow again to close the
STATUS menu.
Note
STATUS menu parameters provide information about the current input
source and listening mode. These parameters cannot be adjusted.
STATUS MENU DESCRIPTIONS
The table beneath each description lists the default and possible
settings for each parameter.
2CH STATUS
• Provides information about 2-channel input sources.
• Features L and R level meters. See “Status Menu Level Meters”
on page 2-20 for more information.
See “Status Menu Parameter Descriptions” on page 3-18 for detailed information.
Parameter Possible Settings
INPUT The selected input
MODE The activated listening mode
INPUT TYPE ANLG, PCM
SAMPLE RATE 44.1kHz, 48kHz, 88.2kHz, 96kHz
2CH STATUS
INPUT
MODE
INPUT TYPE
SAMPLE RATE
dB
0
-6
-15
-30
-45
RL