Filter
Top Products
AV1 Setup
3-39
EXTERNAL NOISE TEST
Opens the SPEAKER LEVEL ADJUST menu, which is used to adjust
output levels while the external noise test is conducted. The exter-
nal noise test requires an external calibration source, such as an
audio calibration disc.
When the external noise test is conducted, the AV1 activates a lis-
tening mode based on the input source that is present. The table in
the next column indicates the listening mode that is activated for
each input source. When a listening mode is activated during the
external noise test, it retains its factory-default settings, ignoring
custom settings that might have been made on the corresponding
listening mode menu. Custom settings will be restored after the
external noise test is complete.
* These listening mode names differ depending on the source, the speaker co figuration
and certain parameter settings.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
C
R SR RR
L SL RL
M
SUB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
LEVELS CALIBRATION
INTERNAL NOISE TEST
EXTERNAL NOISE TEST
BASS PEAK LIMITER
SPEAKER LEVEL ADJUST
FRONT LEFT
CENTER
FRONT RIGHT
SIDE RIGHT
REAR RIGHT
REAR LEFT
SIDE LEFT
SUBWOOFER
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
SPEAKERSSETUP
LEVELS CALIBRATION
EXTERNAL NOISE TEST
2-Channel
Sources
Dolby Digital
Sources
DTS(-ES)
Sources
DOLBY PLII MOVIE DOLBY DIGITAL* DTS(-ES)*