Filter
Top Products
Mode Adjust JBL Performance
5-32
When the Shift command bank is activated, pressing the remote control
DTS button while a DTS(-ES) input source is present toggles the ES
DECODING parameter, cycling through the AUTO, ON and OFF settings.
Note:
The DTS(-ES) STATUS menu includes the SB level meter when:
• The ES DECODING parameter is set to ON and a 5.1-channel
DTS source is present.
• The ES DECODING parameter is set to AUTO and a 5.1-chan-
nel matrix-encoded or 6.1-channel discrete-encoded DTS-ES
source is present.
EX DECODING AUTO, ON, OFF
Controls the Dolby Digital Surround EX decoding feature, which
can be used to extract a rear channel from 5.1-channel Dolby Digi-
tal sources.
• When set to ON, Dolby Digital Surround EX decoding is
engaged for all 5.1-channel Dolby Digital sources.
• When set to OFF, Dolby Digital Surround EX decoding is not
engaged for all 5.1-channel Dolby Digital sources.
• When set to AUTO, Dolby Digital Surround EX decoding is
engaged when a flagged 5.1-channel Dolby Digital source
recorded with Surround EX is detected. Dolby Digital Sur-
round EX decoding is not engaged when a non-flagged 5.1-
channel Dolby Digital source recorded with or without Sur-
round EX is detected.
• The AV1 cannot automatically detect Dolby Digital Surround
EX encoding in non-flagged 5.1-channel Dolby Digital
sources. A non-flagged source does not include information
in the input signal that identifies Dolby Digital Surround EX
encoding.
The DOLBY DIGITAL EX listening mode is available when Dolby
Digital Surround EX decoding is engaged. The DOLBY DIGITAL lis-
tening mode is available when Dolby Digital Surround EX decoding
is not engaged. Dolby Digital Surround EX decoding cannot be
engaged unless both side and rear speakers are present. Refer to
page 5-19 for more information.
When the Shift command bank is activated, pressing the remote
control DOLBY button while a 5.1-channel Dolby Digital input
source is present activates the DOLBY DIGITAL EX or DOLBY DIGI-
TAL listening mode. Subsequent presses toggle the EX DECODING
parameter, cycling through the AUTO, ON and OFF settings.
FRONT STEERING OFF, MSURR, MUSIC, FILM
Adjusts front steering between the front left, front right, and center
speakers. When set to FILM, maximum front steering is applied to
the center channel. When set to MUSIC, moderate front steering is
applied. When set to MSURR, minimum front steering is applied.
When set to OFF, no front steering is applied. It is recommended
that you set this parameter to FILM for film and broadcast sources
and to MUSIC, MSURR or OFF for music sources.
INPUT BALANCE L< to <|> to >R
Controls the balance of the selected stereo analog audio input con-
nectors, compensating for audio input sources with audible chan-
nel imbalance.