Setup JBL Performance
3-22
CONFIGURING ADVANCED ZONE SETTINGS (continued)
S-VIDEO OSD 4:3 ON, OFF
Controls the appearance of the on-screen display when the display
device is connected to an S-video output connector. When ON, the
display device shows the on-screen display in a 4:3 aspect ratio*
regardless of the incoming signal. When OFF, the display device
shows the on-screen display in the same aspect ratio as the input
signal.
* Aspect ratio refers to the size of the picture on the display
device screen or to the size of the display device screen. A 4:3
aspect ratio is almost square. A 16:9 aspect ratio, often referred
to as widescreen, is almost twice as wide as it is high.
Note:
The on-screen display appears horizontally stretched across the display
device screen when all of the following conditions are present:
• The S-VIDEO OSD (4:3) parameter is OFF.
• An anamorphic video input signal is present.
• A 16:9 display device (widescreen) is connected to an S-video out-
put connector.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
DVD1 ADVANCED
INPUT SELECT
2-CH ANLG BYP
S-VIDEO 16:9
S-VIDEO OSD 4:3
COMPONENT OSD
DIGITAL
OFF
AUTO
ON
OFF
ON
OFF
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
ADVANCED
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
INPUTSSETUP
DVD1
ADVANCED
S-VIDEO OSD 4-3