Filter
Top Products
AV1 Setup
3-27
CENTER FULL, 30Hz TO 120Hz, THX 80Hz, NONE
Opens the CENTER SPEAKER menu, which is used to select a cross-
over point for the audio output connector labeled Center. When set
to FULL, the AV1 sends a full-range audio output signal to this con-
nector. Otherwise, the AV1 activates a crossover point at the
selected setting. Choose the setting closest to the low-frequency
rating of the associated speaker. When set to NONE, the AV1 redi-
rects center channel signals to the audio output connectors labeled
Front L/R.
Note:
When the CENTER parameter is set to NONE, center channel signals will
not be redirected if the 5.1a BYPASS listening mode is activated. To redi-
rect center channel signals, configure the speaker setup with the associ-
ated DVD-A/SACD player.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
C
R SR RR
L SL RL
M
SUB
40Hz
60Hz
60Hz
60Hz
40Hz
40Hz
60Hz
60Hz
CENTER SPEAKER
FULL
30 Hz
40 Hz
50 Hz
60 Hz
70 Hz
80 Hz
80 Hz
90 Hz
100 Hz
110 Hz
120 Hz
CUSTOM SETUP
FRONT L/R
CENTER
SIDE L/R
REAR L/R
SUBWOOFER
ULTRA2 SUB
BGC
ASA
40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
SPEAKERSSETUP CUSTOM SETUP
CENTER