Filter
Top Products
25
Speaker setup
Speaker Distance submenu
This submenu provides settings that tell the DTR-6.2 how far away
your speakers are located from the listening position so that it can
provide the optimum sound space. If you are continuing from setting
the speaker configuration and are still in the setting mode, skip
directly to step 2.
1. Press the Setup button.
If a menu other than “1. Speaker Setup”
appears, turn the jog dial until “1. Speaker
Setup” does appear.
6. Press the Return button.
You return to the “Sp Distance?” display.
4. Press the jog dial and then turn it to
set the distance from the front
speakers to the listening position.
3. Press the jog dial and then turn it to
select the unit of measurement.
2. Press the jog dial and then turn it to display the
“Speaker Distance.”
ft
5. Repeat the procedure in step 4 to set the distance
from the center speaker and the surround speakers
to the listening position.
Notes:
• If you press the Return button again, you go back up one more
level.
• To exit the setting mode immediately, press the Setup button.
Return
Push To Enter
DSP
/
Mode ADJ
Push To Enter
DSP
/
Mode ADJ
Push To Enter
DSP
/
Mode ADJ
Push To Enter
DSP
/
Mode ADJ
feet: Select if you will enter the distances in
feet.
meters: Select if you will enter the distances
in meters.
Push To Enter
DSP
/
Mode ADJ
Push To Enter
DSP
/
Mode ADJ
Setup
8. Press the Return button.
You return to the “Speaker Config?” display.
5. Press the jog once and then turn it
to set the size of your front
speakers.
Push To Enter
DSP
/
Mode ADJ
• If “No” is selected for the Subwoofer setting, then this
setting is fixed to “Large”.
Large: Select if the front speakers are large
sized.
Small: Select if the front speakers are small
sized.
None: Select if no center speaker is
connected.
Large: Select if the center speaker is large
sized.
Small: Select if the center speaker is small
sized.
• If “small” is selected for the Front setting, then “Large”
cannot be selected for this setting.
6. Press the jog once and then turn it
to set whether or not a center
speaker is connected and, if one is
connected, its size.
Push To Enter
DSP
/
Mode ADJ
7. Press the jog once and then turn it
to set whether or not surround
speakers are connected and, if they
are connected, their size.
• If “small” is selected for the Front setting, then “Large”
cannot be selected for this setting.
Pressing the jog dial again returns you to the subwoofer setting.
None: Select if no surround left and right
speakers are connected.
Large: Select if the surround left and right
speakers are large sized.
Small: Select if the surround left and right
speakers are small sized.
Push To Enter
DSP
/
Mode ADJ
Push To Enter
DSP
/
Mode ADJ
Notes:
• If you press the Return button again, you go back up one more
level.
• To exit the setting mode immediately, press the Setup button.
Return
Push To Enter
DSP
/
Mode ADJ
Push To Enter
DSP
/
Mode ADJ