Filter
Top Products
11
Remote controller
ZONE 2/SEARCH/ENTER button
ZONE 2: When in the RCVR mode, press this button to perform
operations on the remote zone (Zone 2). [45]
SEARCH: When in the DVD mode, for finding the specific section
on a disc where you want to start playback. [48]
ENTER: When in the MD mode, for confirming the selection. [49,
52-54, 56, 60]
INPUT SELECTOR buttons [28, 29, 45, 46, 49]
Selects an input source.
Same as the input selector buttons on front panel of the DTR-6.2.
The input source for each buttons is given here. DVD:DVD, CD:CD,
V1:Video1, V2:Video2, V3:Video3, V4:Video4, T1:Tape, T2:Not
used with the DTR-6.2, TUN:FM/AM, PH:Phono.
Numeric key/Listening mode selector/SP A, B/
Re-EQ/DISPLAY/DIMMER buttons
1 to 9, +10, --/---, 0: For entering the number of a track. [47-50, 52,
53]
STEREO, DIRECT, DSP / , SURR, A.ST: You can select a
listening mode. [33]
Re-EQ: Depending on the listening mode, you can turn the cinema
re-equalization function on or off. [33]
SP A, SP B: Not used with the DTR-6.2.
DISPLAY: For changing the display in the front display. [30, 50]
DIMMER: Adjusts the display brightness.
There are three settings available: normal, dark and very dark. [30]
LIGHT button
For illuminating the buttons of the remote controller.
This is button is useful when using the remote controller in dark
locations. When pressed, the buttons on the remote controller light
green.
The button for the mode currently selected lights brighter than the
rest.
MODE MACRO button [57, 59]
For executing and programming the Macro function.
SETUP button [35]
For displaying and quitting the Setup menu.
ENTER/cursor button [35, 48]
When selecting items in the Setup menu, press the upper and lower
portions to select item, press the right and left portions to select
parameter values or modes, and press ENTER to select item.
VOL button [29, 31, 46-49, 52, 53]
For adjusting the volume.
TEST/MENU button
TEST: Outputs a test tone for setting speaker levels.
Use this button in conjunction with the LEVEL
/ and CH SEL
buttons to calibrate the speakers levels without entering the Setup
menu. When TEST button is pressed, the test noise (pink noise) is
output. Use the LEVEL
/ buttons to increase or decrease the
sound level. Use the CH SEL button to change from speaker to
speaker. For a more detailed explanation of how to calibrate the
speaker levels, see page 26.
MENU: When in the DVD mode, this button displays the DVD
menu. [48, 52]
MUTING/M button [29, 46-49, 52, 53]
Activates the mute function.