Garmin 541s Headphones User Manual


  Open as PDF
of 84
 
50 GPSMAP 400/500 Series Owner’s Manual
Conguring the Chartplotter
8. If you selected Near or Far in step 7, review the placement of
the Auto Guidance line. Determine whether the line safely avoids
known obstacles, and whether the turns enable efcient travel.
9. Complete an action:
If the placement of the Auto Guidance line is satisfactory,
select MENU > Navigation Options > Stop Navigation.
Proceed to step 11.
If the Auto Guidance line is too close to known obstacles,
from the Home screen, select Congure > Preferences
> Navigation > Auto Guidance > Shoreline Distance >
Farthest.
If the turns in the Auto Guidance line are too wide, from the
Home screen, select Congure > Preferences > Navigation
> Auto Guidance > Shoreline Distance > Nearest.
10. If you selected Nearest or Farthest in step 9, review the
placement of the Auto Guidance line. Determine whether the line
safely avoids known obstacles, and whether the turns enable
efcient travel.
11. Repeat steps 1-10 at least once more, using a different
destination each time, until you are familiar with the functionality
of the Shoreline Distance setting.
•
•
•
Conguring Communications Settings
To change the communications settings from the Home screen,
select Congure > Communications.
Serial Port 1—congures the input/output format for serial port 1 to
use when connecting your chartplotter to external NMEA devices, a
computer, or other Garmin devices.
Garmin Data Transfer
—supports the input or output of
Garmin-proprietary data for communicating with Garmin
software.
NMEA Standard
—supports the input or output of standard
NMEA 0183 data, DSC, and sonar NMEA input support for the
DPT, MTW, and VHW sentences.
NMEA High Speed
—supports the input or output of standard
0183 data for most AIS receivers.
Serial Port 2 (if supported)—congures the input/output format for
serial port 2 to use when connecting your chartplotter to external
NMEA devices, a computer, or other Garmin devices.
NMEA 0183 Setup
—enable or disable NMEA 0183 output
sentences for sounder, route, system, and Garmin NMEA settings.
To enable or disable NMEA 0183 output sentences:
1. From the Home screen, select Congure > Communications >
NMEA 0183 Setup.
•
•
•
 previous next