Support User Manuals

Dolby Laboratories DP570 Stereo System User Manual

Open as PDF

of 127

64 Dolby

®

DP570 Multichannel Audio Tool User’s Manual

Configuring a Monitor System Assigning Monitor System Configuration Settings

Figure A-3 Bass Management Settings

A.1.4 Choosing Back Surround Speakers

Thesettingrecordsthenumberofbacksurroundspeakersyouhaveinyourmonitoring

system.ThedefaultisNone.Ifthisnotcorrect,clickeither1or2.

A.1.5 Emulator Reversion

Thissettingisnotactiveinthecurrentversion.

A.1.6 Setting the Lt/Rt Gain

ThisisaninputtrimfortheseparateLt/Rt Input.Thedefaultvalueis0dB.Adjustitusing

thedialshowninFigure A‐4.

Figure A-4 Lt/Rt Gain Function

A.1.7 Configuring Dolby Pro Logic II

Foradiscussionofthesefeaturesandtheiruses,seeDolbyProLogicIISupportonpage 41.

TosetuptheDP570forDolby

®

ProLogicII:

1. SelectamodebypressingoneofthebuttonsshowninFigure A‐5.Thedefaultis

Movie.

2. InMusicmode,usetheslidersshowninFigure A‐5toadjusttheCenterWidth

value

andDimensionvalues.Thedefaultforbothis0.

Note:Movieistherecommendedmodeforprofessionalmonitoring.Thewiderangeof

possiblechoicesinMusicmodemakeittoocomplexandunpredictabletoemulate.

previous next