Support User Manuals

Dolby Laboratories DP570 Stereo System User Manual

Open as PDF

of 127

40 Dolby

®

DP570 Multichannel Audio Tool User’s Manual

Using the DP570 Features Sticky Settings

4.17 Sticky Settings

WhenyouenableStickySettings,yourlastsettingsfordynamicrangecontrolprofiles,

downmix,speakerselection,LFEmonitor,mastervolume,and emulatorbypassforyour

listeningenvironmentremainwitheachprogramwhenyouleaveoneprogramtomonitor

another.Thisallowsyoutoswitchtoanotherprogram,monitorthatprogram,

thenreturn

totheoriginalprogramwithoutlosingthesettingsyouhadchosenfortheoriginal

program.

WhenyoudisableStickySettings,settingsforthesemonitoringmodesdonotchange

whenyouleaveoneprogramtomonitoranother.

Bydefault,StickySettingsisenabled.Toturnitoff,uncheckthebox.

4.18 Lt/Rt Gain Function

ThiscontrolallowsyoutocontrolgainoftheLt/Rtinput.

TotrimtheLt/RtinputlevelintheDolbyRemote570:

1. ClickSetupintheMainwindowtoopentheSetupwindow.

2. UsetheupanddownarrowstoincreaseordecreasethedefaultLt/Rtgain.

Figure 4‐9showstheLt/RtGaincontrol

ontheSetupwindow.

Figure 4-9 Lt/Rt Gain Control

4.19 Dim Function

TheDimbuttonenablesyoutochangeyourmonitorlevelwithoneclick.Clickit,for

instance,ifaclientwalksinoryouhavetotakeap honecall.Returntoyourmasterlevel

settingbyclickingDimagain.

4.20 Master Trim and Master Volume

TheMasterTrimsliderallowsyoutoraiseorlowerthevolumeofthesignalinputtothe

DP570beforeprocessingbegins.Thiscapabilityisveryusefulinlisteningenvironment

calibrationprocess.

previous next