Support User Manuals

Dolby Laboratories DP570 Stereo System User Manual

Open as PDF

of 127

62 Dolby

®

DP570 Multichannel Audio Tool User’s Manual

Configuring a Monitor System Assigning Monitor System Configuration Settings

Figure A-2 Monitor Setup Tab

A.1.2 Selecting Analog Outputs

ThesystemautomaticallydetectsthepresenceoftheCatNo.548AnalogOutputsCard,

andcheckstheAnalogOutputsboxwhenitispresent.Unchecktheboxifyoudonotwish

tousethem.Ifyouuncheckthebox,allthesettingsinthis areawillbegrayedoutand



unavailable.

A.1.3 Choosing Bass Management Settings

Ifyouhavea5.1‐channelmonitorsystemwithfull‐rangespeakersateverychannelanda

subwoofer,youmay notneedtousebassmanagement,andcanleavethisfeatureatthe

factorydefault,None.Whennobassmanagementisselected,onlytheLFEchannelissent

tothe

subwoofer.

Ifyouhaveanyotherspeakerconfigurationyoushouldchooseappropriatesettingsfor 

BassManagement,SubwooferCrossover,andLFEMonitorMode.Usethecontrols

showninFigure A‐3.

Forexample:

•Ifyourmonitoringsystemconsistsoffivesatellitespeakersandasubwoofer,youcan

redirectthelowfrequenciesfromthe

fivemainchannelstotheSubwooferoutput.

previous next