• When making connections, also refer to the operating instructions of the other components.
• The signaEs input to the color difference (component) video jacks are not output to the VIDEO output jack (yellow) or the S+Video output jack.
• Some video sources with component video outputs are Eabeled Y, CB, CR, or Y, Pb, Pr, or Y, R+Y,B+Y.These terms all refer to component video
color difference output.
• The function assigned to the component video input can be changed at the system setup. For details, see "Setting the video In Assignment"
on page 24.
• The AVR+2803's on+screen display signals are not output from the color difference {component) video output jacks {MONITOR OUT).
DVD player
VIDEO OUT
+++++I+ r++++,l++
Connecting a DVD player ]
DVD IN jacks
• Connect the DVD player's color difference (component) video output iacks
(COMPONENT VIDEO OUTPUT) to the COMPONENT VtDEO-I tN iack using
75 _dohms coaxial video pin-ptug cords¸
• In the same way, another video source with component video Outputs such
as a TV/DBS tuner, etc, can be connected to the VEDEO-2 color difference
(componentl video jacks¸
COMPONENT
VIDEO iN
Y C_ CA
Monitol TV
Connecting a monitor +IV ]
MONITOR OUT jack
• Connect the TV's color difference (component) video input iacks
(COMPONENT VIDEO INPUT) to the COMPONENT MONETOR OUT
jack using 75 OJohms coaxiaE video pimplug cords¸
• The color difference input jacks may be indicated differently on
some TVs, monitors or video components ("CR, CB and Y', "R-
Y, B-Y and Y", "Pr, Pband Y", etc.). For details, carefully read the
operating instructions included with the TV or other component.
9