Filter
Top Products
• Set up in function of your speaker systems. Performing this setup optimizes the system.
• The composition of the signals output to the different channels and the frequency response are adjusted automatically according to the
combination of speakers actually being used.
1
At the System Setup Menu select "Speaker Configuration".
System Setup Menu
7Speaker Configuration
Delay Time
Channel Level
Digital In Assignment
Video In Assignment
Dolby DlKital Setup
Zone2 Control
_,_ Switchtothespeakerconfigurationscreen.
Speaker ConfiEuration
Set whether or not speakers are
connected and, if so, their size
parameters.
• To select the speaker
_Front Sp.
Center Sp.
Subwoofer
"Speaker Configuration
Surround
_ _s_;_
Sp, Ba_ [_
• To select the parameter
G
Center Sp
Front Sp
Subwoofer
Surround Sp
Surround back Sp
Press the ENTER button to finalize the setting.
NOTE: I
Select "Large" or "Small" not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency
(bass sound below frequency set for the Crossover Frequency mode and below) signals. If you do not know, try comparing the sound at both
sett ngs sett ng the vo ume to a eve ow enough so as not to damage the speakers to determ ne the proper sett rig.
• Parameters
Large ................... Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the
Crossover Frequency mode.
Small ................... Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set
for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover
Frequency mode is sent to the subwoofer.
When this setting is selected, low frequencies of below the frequency set for the Crossover Frequency mode are assigned
to the subwoofer.
None .................. Select this when no speakers are installed.
Yes/No ................ Select "Yes" when a subwoofer is installed, "No" when a subwoofer is not installed.
2spkrs/lspkr.......Set the number of speakers to be used for the surround back channel.
If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when "Small" is set for the front, center
and surround speakers.
For the majority of speaker system configurations, using the Small setting for all five main speakers and Subwooofer On with a connected
subwoofer will yield the best results.
18