• These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channel
decoder, such as a DVD Audio player, a multi-channel SACD player, or other future multi-channel sound format decoder.
• When making connections, also refer to the operating instructions of the other components.
_L
Dec°derwitha-°r6-channeJI __1analog output Ez o
For instructions on playback using the external input (EXT. IN) jacks, see page 44.
• if another pre-main (integrated) amplifier or power amplifier is connected, the ZONE 2 jacks can be used to play a different program source in
ZONE 2 the same time. (See page 48)
RC4_16
ZONE 2 INFRARED
RC617 t R_TRANS MITFE R
Integrated pre main amplifier INFRARED£ENSOR OUTPUT iNPUT D_N
_ ° 00'°ooo
AUX OUT
Extension jacks for future use
SERIAL CONTROL terminal
• Connect when using an external Controller
• Use an adapter cable (sold separately) as shown on the diagram at the dght to
conllect the exte[nal cont/oller
For instructions on operations using the ZONE 2 jacks, see page 47, 48.
-- Serial Control cable --
RS2320 GND
TXD RXD
(PCOUT) (PC IN)
11