Filter
Top Products
[] CONNECTIONS
• DO not plug in the AC cord until all connections have been
completed.
• Be sure to connect the left and right channels properly (left with
left, right with right).
• Insert the plugs securely. Incomplete connections will result in the
generation of noise.
• Use the AC OUTLETS for audio equipment only. Do not use
them for hair driers, etc.
• Note that binding pin plug cords together with AC cords or placing
them near a power transformer will result in generating hum or
other noise.
• Noise or humming may be generated if a connected audio
equipment is used independently without turning the power of this
unit on. If this happens, turn on the power of the this unit.
• When making connections, also refer to the operating instructions of the other components.
The power to these outlets is turned on and off when the power is switched between on and standby from the remote control unit or power
switch.
OUTPUT CD player
Turntable [ Connecting a turntable ]
(MM car tlidge)
Connect the tumtable's Output cord to the AVR
_ i gg3/g63's PHONO iac_'s' the L (lee} plug 10 the L
jack the R {rlght) plug to the right iack
NOTE:
This unit cannot be used with MC cartlidges
direc6y Use a separate head amplifier or step up
transfotmer
If humrrfing or othel noise is generated when the
ground w_re is conrlecled, disconnect the grourld
w_re
{Connecting the AC OUTLETS ]
AC OUTLETS
• SWITCHED
(total capacity /20 W {1 A ))
The power to these Outlets Js turned on arid off in coniunct_on w_th the
POWER operation switch on the main unit, and when the power is switched
between on and standby from the remote control unit
driers, TVs ot other electrical appliances
Connecting the pre-out jacks
Use these iacks if you wish to connect external power amplifier(s) to
increase the power of the eont, center and surlourld sound cllar/rlels, or
fol connection to powered loudspeakers
TO use Surround bac_, with one speaker, corlnect the speaker to
SURR BACK L CH
Route the connection cords, etc, in such a _
way that they do not obstruct the ventilation AC 120 V 60 Hz
holes
OUTPUT
MD recorder, CD recorder or other component
equipped with digita_ input/output jacks
[ Connecting the DIGITAL jacks ]
Use these for coi!nections to audio equipment with digital output Refel to page 23 for
instruct_oiis oil setting tllJs tetmina_
[TRIGGER OUT]
Turn the DC 12V voRage on and off for the indMdual functions
For detai_s, see "6ettlrlg the Trigger Out Setup" oil page 28
CD recorder or Tape deck
NOTE:
R L R C 0oo _ _@
_NPUT OUTI_U r _ _ away
[Connecting a tape deck]
Connections for recording:
Connect tile tape deck's recording fflpu_ iacks (LINE _N or REC) to this url_t's tape
recording {CDR/TAPE OUT) jacks using pin plug cords
Connections for playback:
Connect the tape deck's playback output jacks (LINE OUT or PB) to this urlJt's tape
playback (CDR/TAPE IN) jacks using pin plug cords
6