Filter
Top Products
The surround mode used at last for the three types of input signals shown below is stored in the memory, and the signal is automatically played
with that surround mode the next time it is input.
Note that the surround mode setting is also stored separately for the different input sources.
_ Analog and PCM 2-channel signals
_2_ 2-channel signals of Dolby Digital, DTS or other multi-channel format
_3_ Multi-channel signals of Dolby Digital, DTS or other multi-channel format
1
At the System Setup Menu select "Auto Surround
Mode" and press the ENTER button.
System Setup Menu
Ext. In Subw00ferLevel
_Auto Surround Mode
On Screen Display
Trigger Out Setup
Auto Tuner Presets
Setup Lock
2
Select "ON" if you want to use the auto surround mode, "OFF" if you
do not want to use it.
Auto Surround Mode
Enter the setting.
The System Setup Menu reappears.
• Use this to turn the on-screen display {messages other than the menu screens) on or off.
1
At the System Setup Menu select "On Screen Display"
and press the ENTER button.
System Setup Menu
Ext. In SubwooferLevel
Auto Surround Mode
70n Screen Display
Trigger Out Setup
Auto Tuner Presets
Setup Lock
2
Select "ON" or "OFF".
On Screen Display
m_ :_[_
Enter the setting.
The System Setup Menu reappears.
27