Filter
Top Products
• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround mode.
SELECT
(Main unit)
• When turned clockwise
I m
oooo
D_
1 2 1,3
• When turned counterclockwise
F :::::o:oo ooov,
To select the surround mode while adjusting the surround parameters or tone control, press the surround mode button then operate
the selector.
SURROUND
MODE
2
(Mainunit)
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and Parameters" on page 60.)
SURROUND
p._R.J_lE_ER
(Main unit)
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC ][, DTS NEO:6 modes and the input signal switches to a digital
signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode
automatically switches to DTS surround.
57