1
2
Select the input source.
[ Playback with a digital input I
_ Select an input source set to digital (COAXIAL/OPTICAL)
(see page 23).
_ur_T'°_ VDp
(Main unit} (Remote control unit)
_2_Set the input mode to "AUTO" or "DTS".
_E
(Main unit) (Remote control unit)
Select the Dolby/DTS Surround mode.
SU_ND
(Remote control unit}
When performing this operation from the main unit's panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro logic 11or DTS NEO:6.
81jRF_4j_ SELECT
MODE
(Main unit) (Main unit)
Ill I_----q _ mark.
Play a program source with the O===TAL ,
UU • The Dolby Digita] indicator lights
_etTAL
_Cr_ Light when playing Dolby Digital sources.
_ Light
SIGNAL
DE_ECT
_Cr_ Light
• The DTS indicator lights when playing
DTS sources.
The SIGNAL DETECT LED lights
when playing 6.1-channel surround
sources containing the identification
signal.
When the SIGNAL DETECT LED is lit, we recommend
turning the surround back channel using the SURROUND
BACK button on the remote control unit and main unit
during playback.
To use DTS 96/24 sources with the optimum system, we
recommend turning the surround back channel off.
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
SUI:IROZJNDBi_K 8URJIOUND
(Main unit) (Remote control unit)
SURROUND
8ACKCH • Lights when the Surround Back CH is
OUTPUT
_l_ on.
_O, Light
1 3
_OL ' "
_°_° _
1
3 2 4,5 2,6
m=
8 86
53