Filter
Top Products
[2] Outputting a program source to an amplifier, etc. in a different room (ZONE2 mode)
1
Press the ZONE2 button.
ZONE2 3,5
_O_ Ught
{Main unit}
Press the ZONE2/REC button.
The display switches as follows each
time the button is pressed.
ZONE 2
/REC
{Malrl unit)
With "ZONE2 SOURCE" displayed, turn
w _lor_
the FUNCTION knob and select the _1_O_
source you wish to output.
• The indicator of the selected source
light.
{Maill unit}
Start playing the source to be output.
• For operating instructions, refer to the manuals of the
respective components.
To cancel, turn the function knob and
select "SOURCE".
(Mai_ unit}
3
1
I
2
Display 2
"=:_='='=i, H'=".'='_ ='="='='=i H'='=='='.i ....
=::..L._i"i E:..=::. .:::=L._L._r_:.L., E:.
NOTES:
• The signals of the source selected in the ZONE2 mode are also
output from the VCR-1, VCR-2 and CDRfFAPE recording output
jacks.
• Digital signals are not output from the ZONE2 audio output
jacks.
[3] Remote control unit operations during multi-source playback (selecting the input source)
This operation is possible when ZONE2 mode is selected.
This operation is not possible in the REC OUT mode.
Select "ZONE2" using the ZONE 2 _. 2
button. 1
(Remote colltro_ urllt)
Press the ZONE2 "ON" button. ZONe2
OFF DN
TOcancel the ZONE2 mode. ,_
Press the ZONE2 "OFF" button.
{Remote contro_ urfit)
Press the input source button
• The ZONE2 source switches directly.
A The output level of the ZONE 2 OUT
terminals can be controlled using the
+tZ)
VOLUME + and buttons on the remote
control unit. @_._.
The output level of ZONE 2 OUT can be
controlled only if ZONE2 voL level is set
"Variable" at Zone2 Control in System
Setup Menu. (See page 26)
{Remote corEro_ unit)
-_ DEFAULT SETTING (ZONE2 VOLUME LEVEL) :
- -- dB (MINIMUM)
5 56
The main zone output can be
turned on and off with the
"MAIN ON/OFF" button.
5
4
When the ZONE2 SOURCE function is
set to TUNER, the preset channel can
be selected using the CHANNEL + and
- buttons on the remote control unit.
_BL
0
{Remote control unit)
47