Filter
Top Products
(1) Resetting "learned" buttons
1
Press the USE/LEARN button with the tip of a pen, etc., to set
the learn mode.
• The mode selector buttons and LEARNED/TX indicator
flash.
Hashes
Press the mode button of the equipment that is to be reset.
• Mode button and LEARNED/TX indicator flash.
(ZZ)
CABLE
Hold for 4 seconds or longer the mode button of the
equipment that is to be reset and the ON/SOURCE button.
• The mode button and the LEARNED/TX indicator will again
flash, and the learned remote control signal of the selected
equipment will be deleted.
r,ASLE
OOOO
m
1,4 _
4
Press the USE/LEARN button.
39