Filter
Top Products
Service Mode
10-4 5975338 BARCOVISION 9200 210497
Two possibilities :
1) distance between red lines is smaller than distance between green
lines.
Turn screw 5 and 6 clockwise until distance between lines 5 and
6 is the same for the red and green lines.
2) distance between red lines is greater than distance between green
lines.
Turn screw 5 and 6 counter clockwise until distance between lines
5 and 6 is the same for the red and green lines.
4
1
6
5
3
2
4
1
65
3
2
Due to this movement the lines 1, 2, 3 and 4 may be out of
convergence. Repeat the above mentioned steps for the respective
lines.
If all lines are correctly converged, press EXIT to return to the
Test
pattern
menu.
Blue on green convergence.
Use the control disk to highlight
Blue on green
and press ENTER to
display the Blue on green test pattern.
Repeat the same procedure as for Red on green lines but read blue
when red is indicated.
CONVERGENCE
879c
Green
Blue on Green
Red on Green
Hatch
CONVERGENCE
879d
Green
Blue on Green
Red on Green
Hatch
To check the result of the convergence adjustments, highlight
Hatch
and press ENTER. A hatch pattern will be displayed on the screen.
ENTER : displays a hatch pattern.
EXIT : returns to the service menu.
All lines must be displayed in white, if not so repeat the convergence
adjustment procedure.