Filter
Top Products
Connections
6-5
5975338 BARCOVISION 9200 280497
Push the control disk key up or down to select
System Settings
and
press
ENTER.
Use the control disk to select Input Slots by pushing up or down and
press
ENTER. The internal system will scan the inputs and displays
the result in the Input Slots menu.
Push the control disk up or down to select the corresponding RGB
input slot. To change the sync priority for Sync separate, press
ENTER key to toggle between CV and CS or HS&VS.
Possible indication :
RGB-SS [CV] = separate sync is composite video signal
on H/C input.
RGB-SS [CS or HS&VS] = separate sync is composite
sync or horizontal and vertical sync.
RGB-SOG = sync on green.
Component input module.
Connect your component signals (Y-luma, R-Y and B-Y), e.g. a
professional VCR to the Component input module.
Component video : 4 x BNC
R-Y : 0.7 Vpp ± 3 dB
B-Y : 0.7 Vpp ± 3 dB
Y : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if Tri-level sync on green
Composite sync : 1 Vpp to 4 Vpp ± 3 dB
All input signals are always 75 ohm terminated, even if the module is
"not selected".
Professional VCR
RS 232 IN
REMO TE
GREEN - OPERATION
RS232 OUT
IR- ACKNOWLEDG ED
IR -RECEI VED
DIAGNOSTICS
CODE
IR -RECEI VER
On
COMPONENT VIDEO INPUT
Sync
Blue - luma
Luma
Red - luma
Component input selection :
Key in the corresponding slot number on the RCU or the local keypad.
Indication on the input slot menu :
Component Video-SS = Component video with separate sync
Component Video-SOY = Component video with sync on Y
Component Video-3LSS = Component video with 3 level separate sync
Component Video-3LSOY = Component video with 3 level sync on Y
MAIN MENU
832b
Picture Control
Audio Control
System Settings
File service
Service Mode
SYSTEM SETTINGS
•
Lamp Control
Installation
Input slots
Summary
Color
INPUT SLOTS
1. RGB-SS [CV]
2. RGB-SOG
3. Video/S-Video [Video]
4. Component video-SS
+ 800-peripheral
•
837