Barco R9001290 Home Theater System User Manual


 
Connections
6-3
5975338 BARCOVISION 9200 280497
Video/S-video input module
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of
Super VHS-signals.
VIDEO/S-VIDEO INPUT
On
On
Video input
Audio input not
available
S-Video input
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
Input selection :
Key in the corresponding slot number on the RCU or the local
keypad. Depending on the priority setting in the Input slots
menu, Video or S-Video will be displayed. If the wrong source
type is displayed, start up the adjustment mode by pressing
ADJUST or ENTER.
Push the control disk key up or down to highlight System settings and
press
ENTER to display the 'System Settings menu'.
EXIT returns to operational mode.
Use the control disk to select 'Input Slots' by pushing it up or down and
press
ENTER. The internal system will scan the inputs and displays
the result in the 'Input Slots menu'.
Push the control disk up or down to select the corresponding (video
or S-video) input slot number.
To change the priority between Video and S-Video, press
ENTER
key to toggle.
Straps on module level.
Floating or non floating input
Floating
Non-Floating
J11
J12
J13
Floating or non-floating input.
Video input :
J11 : strap "yes" : non floating strap "no" : floating
S-Video input :
J12 : strap "yes" : non floating strap "no" : floating
J13 : strap "yes" : non floating strap "no" : floating
Factory preset : strap on, input non floating.
TV tuner, e.g.
TVDM 40 stereo
VCR
Audio amplifier
Composite
Video
VCR S-VHS
Luma/Chroma
RS 232 IN
RS232 OUT
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE
IR-RECEIVER
MAIN MENU
832b
Picture Control
Audio Control
System Settings
File service
Service Mode
SYSTEM SETTINGS
Lamp Control
Installation
Input slots
Summary
Color
INPUT SLOTS
1. RGB-SS [CV]
2. RGB-SOG
3. Video/S-Video [Video]
4. Component video-SS
+ 800-peripheral
837