Filter
Top Products
Source Set Up
8-2 5975338 BARCOVISION 9200 210497
Push the control disk up or down to select the most fitting file and press ENTER to select.
When scrolling through the files, the image will be adapted according the settings of the
selected file (on line adaptation). When the best fitting image is displayed, press
ENTER
to select this file. A loading message with the selected file name will be displayed during
the installation of the selected file.
If the displayed image is not yet as it has to be, select the most corresponding file and go
to the Edit menu to change the file settings.
The actual active file is displayed on the second last line of the Load menu.
FILE SERVICE
847c
Load
Edit
Rename
Copy
Move
Delete
Options
Edit file
The Edit file menu makes it possible to change the settings of the file
according to the real settings of the connected source. Consult the
source specification before entering the VISION.
To start up the EDIT menu, push the control disk up or down to select
EDIT in the FILE menu and press
ENTER.
EDIT FILE
pal .s1 (s1. 675x278i)
pal .c50 (s1. 675x278i)
secam .s3 (s3. 675x278i)
856
pal .c50 (s1. 675x278i)
Select the file which must be edited (mostly the active file) and press
ENTER.
The following selection menu will be displayed.
Read only
read/Write
EDIT FILE
pal .s1 (s1. 675x278i)
pal .c50 (s1. 675x278i)
secam .s3 (s3. 675x278i)
857
pal .c50 (s1. 675x278i)
Read Only
Read/Write
Read only
: the settings can be changed but will not be saved.
Read/Write
: the settings are displayed and changes can be made
and saved.
Push the control disk up or down to select and press
ENTER.
The Edit file adaptation menu will be displayed.
The file name will be displayed in the upper right corner.
EDIT FILE
851
pal .c50
Horizontal
Total 864 pixels
Active 675 pixels
Shift +114 pixels
Period 63.7 µs
Vertical (field)
Total 312 lines
Active 278 lines
Shift +21 lines
Interlaced [on]
Read AMDS
Options
The following items can be adjusted :
Total quantity horizontal pixels
Active quantity horizontal pixels
Horizontal shift in pixels
Horizontal period in µs (is automatically adapted during the installa-
tion of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of
a file with LOAD)
Active vertical lines
Vertical shift in lines
Interlaced : toggle on/off (is automatically set to its correct position
during the installation of a file with LOAD)
All settings can individually be changed (in video and S-video,
horizontal total pixels cannot be changed). Push the control disk up
or down to select an item. The color of the selected item will change
and follow one of the three methods to change the value.
a. press
ENTER to activate the digits and enter directly with the
numeric keys on the RCU or local keypad the new value or
b. press
ENTER to activate the digits. Push the control disk to the
right or to the left to select the changing digit. Push the control disk
up or down to scroll to desired digit. When finished press
ENTER to
confirm.
c. counting up or down by pushing the control disk to the right or to
the left.
To have a better view during an adjustment of the 'active' file, select
"Horizontal"
or
"Vertical"
by pushing the control disk up or down and
press ENTER.
A full image is displayed with the settings on the left side.
To change the values, highlight (color change) first the changing
value by pushing the control disk up or down and continue by pushing
the control disk to the left or to right to count up or down.
How finding the correct values for the displayed item?