Filter
Top Products
5 Set the mainframe’s power switch to standby ( O
I
).
Caution Installing or removing the module with power on may damage components in the
module.
6 Place the module’s card edges (top and bottom) into the module guides in the slot.
7 Slide the module into the mainframe until the module connects firmly with the
backplane connectors. Make sure the module slides in straight.
8 Attach the module’s front panel to the mainframe chassis using the module’s captive
mounting screws.
VT1433B User's Guide
Installing the VT1433B
1-5
VXI Mainframe
Slotted
Captive Screws
Power Switch
VT1433B
b
u
s