Teac MC-DV250 Home Theater System User Manual


 
ENGLISH
68
Settings
This chapter describes how to use the SETUP menu. Most settings
and adjustments are required to be set when you first use the
system.
Using the SETUP menu, you can adjust the picture size, set a
preferred language for audio and the OSD (on screen displays),
limit playback by children, et cetera.
Note
<
Setting doesn‘t work during playback and resume mode of
DVD. In that case, press the STOP button once or twice to
stop playback completely.
MAKE SURE YOUR TV IS CONNECTED TO THE UNIT AND
TURNED ON. SETUP USES ON-SCREEN MENUS TO PROGRAM.
Press the DVD button.
Press the SETUP button to display the SETUP menu.
The setup menu appears on the TV screen.
Select a menu to change using the g /t buttons and
press the ENTER button or
b
button.
Select an item to change using the
5
/
b
buttons and
press t
button.
Select the desired option using the
5
/
b
buttons and
press the ENTER button to confirm your selection.
Use the numeric buttons (0 to 9) to key in numbers, such as
the password for parental control.
Use the
5
/
b
/g /t buttons and the ENTER button to select
and set other items.
When the settings have been finished, press the SETUP
button or select to exit the SETUP menu.
6
5
4
3
2
1
--General Setup Page--
Go To General Setup Page
TV Type
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Last Memory
PAL
LB
ON
ENG
RAW
OFF
ON
ON
2
6
5
3
1