Filter
Top Products
CAUTIONCAUTION
42 Tact Audio
3 - Left click your mouse in the square next to System to select it with a check
mark.
2 - Press and hold the “Control” key on your computer keyboard and then press
the “S” key simultaneously. This should display the System Option (1) in the
bottom center of the programming window.
1 - From the TacT-2.2 X RCS software main screen, click on the “Program TacT-
2.2 X” button. You should now see the programming window.
4 - Press the “Program” button and follow the prompts by answering all
questions. You will need to be able to answer “Yes” to all questions to start the
system file reprogramming. The RCS-2.2 X will return to normal operation mode
when finished.
Update the Tact-2.2 X Firmware
1
Step IV:
Reprogram the
System Files
After updating the firmware the System Files now need to be reprogrammed.