Filter
Top Products
CAUTIONCAUTION
32 Tact Audio
The tone menu allows for easy and very detailed system tonal control. Use the
navigation buttons to highlight an option. To select the highlighted option press the
“ENTER” button. To modify the selected option use the “UP” and “DOWN” naviga-
tional buttons. To deselect the selected option press the “ENTER” button again.
1 - Level control is used to set the low, mid and high frequency
filter attenuation. Filter level is given in dB and can be changed
in increments of 0.1 dB. Maximum filter level is 12 dB and
the minimum filter level is -12.0 dB.
2 - Frequency Control is used to set the cutoff frequency for the
low and high frequency filters and to set the center frequency
for mid (bandpass) filter.
3 - Q (Octave) control sets the filter bandwidth for the mid filter.
TONE menu
Front Panel Display
Note: An EQ preset must be enabled from the main screen for the PAR EQ
and TONE menus to be active. If the EQ preset is set to “BP” the PAR EQ
and TONE controls are disabled.