Filter
Top Products
21Tact Audio
The RCS 2.2X can be equipped with a state of the art Analog to Digital Converter
(ADC module optional) . To further enhance the converters performance, the system
offers two selectable gain values for the ADC input stage. These values can be
assigned to each input independently.
To select an option use the “UP” and “DOWN” navigation buttons and to change its
value press the “ENTER” button to toggle between the -6dB and 0 dB selections.
ADC menu
(optional ADC module)
The RCS 2.2X is equipped with a sample rate converter on each digital output.
Each output can independently be set to 44.1, 48, 88, 96 and 192 KHz sampling
frequencies.
To set the sampling frequency for digital output 1, use the “LEFT” or “RIGHT”
navigational buttons to highlight the desired option (on line 1) and then press the
“ENTER” button to make the selection. The new sampling frequency will be
displayed in block (3).
To set the sampling frequency for digital output 2, use the “LEFT” or “RIGHT”
navigational buttons to highlight the desired option (on line 2) and then press the
“Enter” button to make the selection. The new sampling frequency will be
displayed in block (4).
NOTE: This menu does not affect the analog output sampling frequency.
DOUT-FS menu
Front Panel Menu
NOTE: The optional ADC module is required for analog inputs.