Filter
Top Products
CAUTIONCAUTION
18 Tact Audio
When the RCS 2.2X is powered on the main screen will be displayed.
To move the cursor indicator (10) use the front panel or remote control navigation
buttons. To select an option press the “ENTER” button.
1 - Correction preset selection
2 - EQ preset selection
3 - Correction menu option
4 - Parametric EQ menu option
5 - Tone control menu option
6 - Output sampling frequency indicator
7 - Input sampling frequency indicator
8 - RCS 2.2X operating mode
9 - Master level in dB
10 - Cursor indicator.
Correction preset selection
To select one of the nine correction presets or bypass them use the “LEFT” or
“RIGHT” navigation buttons to position the cursor over CR (1). Once the cursor is
positioned over CR (1) press the “ENTER” button. The system will then display a pull
down list containing all presets. Use the “UP” and “DOWN” navigation buttons to
point to the desired correction preset and then press the “ENTER” button. This action
will engage the selected preset and display the new selection in the CR box (1). Once
the cursor is positioned over CR (1) you can also select a correction preset by
pressing one of the ten buttons located in the block labeled “CORRECTION” on the
remote control.
EQ preset selection
To select one of sixteen parametric EQ presets or bypass them use the “LEFT” or
“RIGHT” navigation buttons to position the cursor over EQ (2). Once the cursor is
positioned over EQ (2) press the “ENTER” button. The system will then display a pull
down list containing all presets. Use the “UP” and “DOWN” navigation buttons to
point to the desired EQ preset and then press the “ENTER” button. This action will
engage the selected preset and display the new selection in the EQ box (2). Once
the cursor is positioned over EQ (2) you can also select a correction preset by
pressing one of the ten buttons located in the block labeled “CORRECTION” on the
remote control.
Front Panel Display
Main screen
Note: with the remote control you can only select first nine presets. To select
the rest you must use front panel controls.