Filter
Top Products
CAUTIONCAUTION
30 Tact Audio
1 - TABLE menu option. To enter the TABLE menu screen
highlight and select either the “LEFT & RIGHT”, “LEFT”,
or “RIGHT” selections and then press the “ENTER” button. The
available selection will be determined by the setting of the LINK
option explained below.
2 - LINK menu option. This option determines if the left and right
channels are linked to the same EQ filters. If “NO” is selected
the channels are not linked and each channel has a separate
set of EQ filters. If “YES” is selected the channels are linked
and there will be only one set of filters used for both the left
and right channels. To change the LINK setting highlight the
current LINK selection and press the “ENTER” button to toggle
between the YES and NO selections.
3 - PRESET menu option. This option allows for EQ preset
selection. The “*” character indicates the current preset. To
select a new preset highlight the PRESET option and by use
the “LEFT” and “RIGHT” buttons to scroll through available
presets. When the desired preset is displayed press the
“ENTER” button to select it.
4 - LOCK menu option. This option is used to lock the current
parametric EQ preset. When set to YES the parametric EQ
preset can not be changed. To change the LOCK setting high
light the current LOCK selection press the “ENTER” button to
toggle between the YES and NO selections.
5 - Active Preset display. This displays the preset that is
currently loaded into the system. This is not a selectable
menu option.
Parametric EQ menu
Front Panel Display
The Parametric EQ menu is used to apply up to twelve bands of parametric equal-
ization for the left and right channels. The EQ processing can be applied in two dif-
ferent ways. Both the left and right channels can be linked together to apply pro-
cessing globally, or both the left and right channels can be processed indepen-
dently for unique settings for each channel.
Note: An EQ preset must be enabled from the main screen for the PAR EQ and
TONE menus to be active. If the EQ preset is set to “BP” the PAR EQ and
TONE controls are disabled.