Filter
Top Products
CAUTIONCAUTION
24 Tact Audio
COMM menu
The communication menu allows for the RS232 baud rate selection and device
address assignment. By default the RCS 2.2X is set to baud rate of 57600.
To change the system baud rate use the “UP” and “DOWN” navigational buttons to
highlight the desired baud rate and then press the “ENTER” button to select it. The
new baud rate will be displayed on the bottom of the screen.
To change the system device address highlight the “Address” option and then us-
ing the “LEFT” and “RIGHT” navigational buttons select the desired system ad-
dress. The RCS 2.2X is shipped with the default address set at 1.
NOTE: If you change the device address make sure that you select the ap-
propriate device address in the RCS 2.2X Room Correction software.
CRO menu
When an option is selected the system will load the crossover filter and resume to
normal operation. Crossover filters are user programmable from the Crossover
screen in the Room Correction Software.
Crossover names are also user programmable from the Crossover screen in the
RCS software. For crossover names you should choose symbolic names that
somehow relate to the crossover filter characteristics.
The crossover menu offers five crossover selections options for use in bypass mode
only. Crossovers in correction mode are implemented into the correction filter via
the RCS software. To highlight an option use the “UP” and “DOWN” navigational
buttons. To make a selection press the “ENTER” button. The selected option will be
displayed on the top of the screen(1).
Front Panel Display