Filter
Top Products
CAUTIONCAUTION
22 Tact Audio
The polarity menu allows for an independent polarity setting for each channel.
Each channel can be set to “+” (0) or “-” (inverted).
POL menu
The test menu is designed to allow for a quick system check. When engaged it will
produce pink noise on all selected channels (1). When a channel is set to “Y” pink
noise will be heard from that channel when “Run Test” is selected.
To highlight an option use the “UP” and “DOWN” navigational buttons and then
press “ENTER” button to make your selection. After all selections are made, high-
light the “Run Test” option and hold down the “ENTER” button to produce the test
signal. The test tone will stop when the “ENTER” button is released. Press the
“MENU” button to exit this menu.
TEST menu
Tttt
cc
To select an option use the “UP” and “DOWN” navigational buttons and to change
its value press the “ENTER” button to toggle between a “+” or “-” setting.
Front Panel Display