Filter
Top Products
11Tact Audio
Digital output 2
subwoofers
The RCS 2.2X has three digital outputs for subwoofer(s) :
- one RCA (S/PDIF)
- one AES/EBU (XLR)
- one TosLink
All outputs are 24-bits at 44.1, 48, 88, 96 or 192 kHz sampling rates. The output
sampling rate is set in the “DOUT” menu. (TosLink does not support 192kHz)
The sub output is for your subwoofer(s) and can be configured for either mono or
stereo. Use the “MODE” menu to set the appropriate output mode 2.0, 2.1, or 2.2.
Connect one of these outputs to a TacT digital amplifier or external DA converter.
Optional modules
The RCS 2.2X is designed to accommodate virtually any input and output needed
without adding extra cost for features certain users might not use. There are therefore
3 optional modules that can be installed:
- ADC-converter module for analog inputs such as a Tuner,
Cassette deck, VCR etc.
- DAC-converter module for main channels, for example
when the RCS 2.2X is used with traditional analog
amplifiers
- DAC-converter module for subwoofer(s), for example when
the RCS 2.2X is used with analog self-powered
subwoofer(s)
These modules are based on the latest 24-bits/192kHz state-of-the-art technology
and offer performance far beyond that of most stand-alone converters. Due to the
modular design of the RCS 2.2X, these modules can be added any time or exchanged
if upgrades should become available.
RCS 2.2X Connections