Filter
Top Products
Operation 6
F6 remote control handset
The F6 remote control handset
controls all the functions of the K6
DVD surround receiver. The ad-
justments you make are displayed
on the integral screen and also on
a TV set which is connected to the
system.
CD/DVD
AUX
TAPE
PAUSE
OK
STOP
PLAY
1
4
7
SRC
M
E
N
U
F
U
N
C
T
I
O
N
AMP
T/C
SRND
2
5
8
0
3
6
9
TUNER
TV/STB
VCR
F6
DISP A / B
O
V
L
+
Basic functions
press
briefly
Switches the K6 on from the Off state *), and switches the unit
to stand-by mode from the On state.
In stand-by mode the K6's video pass-through circuit remains
in operation, i.e. the programme from the selected video
source continues to be passed to the TV set and video re-
corder, and can therefore still be viewed and/or recorded.
The programme source being passed through the machine is
indicated on the screen. It can be switched at any time using
the F6 RC handset.
*) Note
The pass-through function only works if the primary mains
switch on the underside of the front panel is set to On.
press
for 2 sec.
Switches the unit off.
In the Off state only the integral alarm timer remains in opera-
tion, and the integral screen displays the time of day. If the
alarm function is active, the K6 switches itself on automatically
at the programmed alarm time.
press
for 2 sec.
Activates screen angle adjustment. The angle is adjusted
using the
and
buttons.
press again
for 2 sec.
Activates screen brightness adjustment. The brightness is
adjusted by pressing the
and
buttons briefly.
Source select
Selects the integral CD/DVD player as programme source.
Selects the integral tuner as programme source.
press
repeatedly
if necessary
Selects the inputs AUX-A, AUX-PH and AUX-AV in turn and
selects these units as program source.
press
repeatedly
if necessary
Switches to inputs TV and STB (= SET TOP BOX, SAT re-
ceiver), and selects these devices as program source.
press
repeatedly
if necessary
Switches to the inputs TAPE 1 (analogue recorder) and
TAPE 2 (digital recorder), and selects these devices as pro-
gram source.
Switches to the VCR input (video recorder) and selects this as
program source.
Amplifier functions
Adjusts volume in 1dB increments.
short
press
Switches the loudspeaker outputs in the sequence
A -
B -
A+B.
press
for 2 sec.
Switches off the loudspeaker outputs
A and
B
(mute function).
Surround functions
(see chapter 'Surround sound - explanatory notes')
short
press
Displays the active surround mode on the integral screen.
press short
repeatedly
Cycles the current music signal through the possible surround
modes.
press long
repeatedly
Cycles the current music signal through the possible surround
modes in reverse order.