Filter
Top Products
19 Operation
Using the Disc Player to play audio CDs
Inserting an audio CD
Operation:
Select Disc mode
DISC
DISCDISC
DISC
then e.g.
NO DISC
NO DISCNO DISC
NO DISC
press
for 2 sec.
Open drawer
OPEN
OPENOPEN
OPEN
Insert audio CD
Sensor
Close drawer again and
start playback
CLOSING
CLOSINGCLOSING
CLOSING
then
READING
READINGREADING
READING
then e.g.
CD 16
CD 16CD 16
CD 16
Explanation:
Audio CDs contain recordings of music,
and they can be recognised by the logo
shown here.
To select the Disc Player press the
button on the RC handset.
Open the drawer by a long press on the
but-
ton *) and insert a CD in the drawer with the playable
side facing down. Check that it is centrally located in
the appropriate recess in the drawer.
Close the drawer by pressing the
button *)
briefly. Initially the K6 gathers the information about the
inserted CD (e.g. No. of tracks, track times etc.), then the
CD starts playing.
*) Notes
The drawer can also be opened and closed by moving
your hand close to the sensor under the front panel.
Calling up additional CD player information
Operation:
Select Disc mode
DISC
DISCDISC
DISC
then e.g.
CD 16
CD 16CD 16
CD 16
press
briefly
Switches integral screen
display between
track display
and
display of playing time
CD 16
CD 16CD 16
CD 16
CD 3 - 15
CD 3 - 15CD 3 - 15
CD 3 - 15
Explanation:
The screen *) displays the passage of the CD in the
machine which is currently being played. This information
can be displayed in either of two different ways:
1. Track number (number of current track)
2. Track time (minutes and seconds of track
currently playing)
To switch from one type of display to the other you must
press the
button repeatedly.
The display type you select is retained until you press the
button briefly again, even if you insert a different
CD or switch the machine off in the meantime.
*) If the TV set is switched on, the supplementary CD
player information appears on the TV screen.