Filter
Top Products
Basic settings 38
Loudspeaker Position Menu
In the 'Loudspeaker Position Menu' you can enter the
correct distance to the listening position for each loud-
speaker separately (in 0.3 m increments).
This enables the system to compensate for delays due to
unequal distances from the listening position.
Measure the distance between the listening position and
the loudspeakers which are present.
Enter the measured distances.
As can be seen in the diagram, the select buttons access
the input positions in the following fixed sequence.
Output channels which are not in use (see 'Loud-
speaker Menu') cannot be edited.
• Main loudspeaker, front left................................. (FL)
• Center loudspeaker, front center .................. (Center)
• Main loudspeaker, front right .............................. (FR)
• Surround loudspeaker, rear right........................ (SR)
• Surround loudspeaker, rear left .......................... (SL)
• Active subwoofer (any position)....................... (SUB)
Enter the measured distances using the change buttons;
the increment is 0.3 m.
Note
The maximum distance for any one loudspeaker to the
listening position is 12 m. Greater distances than this
cannot be recommended for acoustic reasons, and the
system is not designed to compensate for such long
delays.