Filter
Top Products
5 Operation
CD / DVD drawer
Opening the drawer
To open the drawer first select the Disc Player as pro-
gram source, then hold the
button on the remote
control handset pressed in for about 2 seconds.
The drawer can also be opened by moving your hand
close to the sensor
located below the unit's front
panel.
Closing the drawer
Press the
or
button on the RC handset
to close the drawer.
You can also close the drawer by giving it a gentle push.
Sensor
Infra-red sensor for opening the CD/DVD drawer.
Headphone socket
3.5 mm Ø barrel socket for stereo headphones with an
impedance of at least 50 Ω.
This socket is also used to connect the calibration micro-
phone for the automatic loudspeaker calibration process
(see 'Configuration Menu').
Multi-function screen
The integral screen provides information about the status
of the K6 and all its settings. The angle of inclination and
brightness of the screen can be varied to ensure good
legibility.
The screen runs back to its retracted setting when the
unit is switched off; it reverts to the previously set posi-
tion automatically when you switch on again.
a
Main display
The main display provides context-sensitive infor-
mation regarding the program source or the cur-
rently active process.
b
Tuner reception mode FM (VHF)
c
Tone control settings
These symbols indicate the current settings of the
tone controls.
d
Menu symbol
Indicates that a device menu is open.
e
Timer symbol
Indicates that the timer is active.
f
Alarm time
When the timer is active this symbol indicates the
alarm time. This only applies if the K6 has been
switched off from the RC handset, or is switched to
stand-by mode.
g
Loudspeaker
A and
B
Indicates the status of the loudspeaker groups
A
and
B.
h
Loudspeaker channels
A
Displays the active loudspeaker channels for loud-
speaker group
A.
The display varies according to the content of the
programme material currently playing..
i
Disc Player medium display
Indicates the type of disc (DVD, CD etc.) currently
in the Disc Player.
k
Decoder mode
This display field informs you of the current oper-
ating mode of the surround decoder.
The decoder mode varies according to the settings
you have made (surround, stereo, mono, sound
field) and according to the sound format of the
programme material currently playing.
Tuner reception mode
l
glows when a stereo programme is picked up.
glows if the attenuator is switched on.