Filter
Top Products
Setting up 50
Adjustments at the TV set
Your TV set must be correctly configured in order to
operate correctly with the K6. The necessary settings are
as follows:
Selecting the AV input
You must select an AV input on your TV set which
supports the video norm you have set on the K6.
Some 16:9 TV sets use a switching signal (pin 8 of
the SCART socket) to switch the video format. Use
the SCART socket on the TV set which supports this
switching function, and set the TV set appropri-
ately *).
Decoder mode
Your TV set must pass the signals it receives to the
SCART socket, so that you can view and hear the
terrestrial programmes received by the TV set via the
K6. This will also ensure that you will be able to see
the on-screen menu system of the K6 in TV mode.
You may need to change this setting manually with
some TV sets, i.e. set it to 'Operation with external
decoder' *).
Select the video norm to suit the connected
source devices
If you have a source device which generates different
video norms, but a TV set which is not multi-norm ca-
pable, you may have to select the standard video
norm for all devices, as all equipment generally sup-
ports this norm.
*) The steps required to configure your TV set in this
way are described in the operating instructions sup-
plied with the set.
If you have a
TV set of the types TV 720, TV 820 or
TV 920, please carry out the following adjustments:
Configuring the TV 720, TV 820 or TV 920
No. F1
button
Select / activate
menu point
1
Call up 'TV' menu
2
red
Equipm. configuration
3
yellow
Device connection
4
blue
Euro 1
5
Decoder A
6
Store
7
red
Signal type selection
8
Decoder A controls AV operation
9
Store
10
Return to 'Equipm. configuration' menu
11
red
further
12
yellow
RGB priority
13
yes
14
Store
15
Return to 'Equipm. configuration' menu
16
Return to 'TV' menu
17
white
Station settings
18
blue
TV station table
19
Select program positions **)
20
white
Signal **)
21
blue
Aerial **)
22
Aerial via Decoder A **)
23
Store **)
24
Leave menu
**) Steps 19-23 have to be repeated for all program
positions you wish to use!