Filter
Top Products
Operation 16
Renaming a Program
Operation:
With Tuner selected . . .
press
briefly
Call up Tuner Menu *)
e.g.
MODE NORM
MODE NORMMODE NORM
MODE NORM
Call up Program Menu *)
PROGRAM
PROGRAMPROGRAM
PROGRAM
Confirm selection
e.g.
P01 105-60
P01 105-60P01 105-60
P01 105-60
Press repeatedly until the
display shown here ap-
pears on the integral
screen
e.g.
RENAME P01
RENAME P01RENAME P01
RENAME P01
/
Select the Program Num-
ber whose name is to be
edited
to
Optional: enter Program
Number directly
e.g.
RENAME P05
RENAME P05RENAME P05
RENAME P05
Activate name input
e.g.
WDR 4
WDR 4WDR 4
WDR 4
/
Change input position
e.g.
_
__
_ WDR 4
WDR 4 WDR 4
WDR 4
Change the letter at the
input position
e.g.
M WDR 4
M WDR 4M WDR 4
M WDR 4
Repeat the last two steps until the desired name is dis-
played on the screen, then
Store name and close
Tuner Menu
e.g.
MEINNAME
MEINNAMEMEINNAME
MEINNAME
or
Leave Tuner Menu with-
out storing the name
*) The Tuner Menu and the Program Menu are also
displayed on the screen of a TV set connected to the
system (see illustrations on previous page).
Explanation:
Not all radio transmitters broadcast the station name, and
in such cases the integral screen displays the tuning indi-
cator and the reception frequency instead of the station
name. Other transmitters broadcast the station name as a
moving script, which is at variance with the RDS norm.
If you wish to display a 'program name' on the integral
screen in such cases, you can use the K6's Rename
function. This process enables you to assign any name to
each Program Number.
First call up the Rename function, then use the
/
buttons or the numeric buttons to enter the Program Num-
ber whose name is to be entered or changed.
Press the
button, and you are ready to edit the
name.
You will see a flashing pointer, or cursor, on the integral
screen and the screen of a TV set connected to the sys-
tem. This cursor indicates the input position, and you can
move it using the
/
buttons.
Use the
and
buttons to change the letters at the
input position.
You can now enter the name of your choice, between one
and eight letters in length. The new name is stored when
you press the
button.
Note
A name you choose yourself takes priority over the RDS
station name which the radio transmitter broadcasts, i.e. it
not over-written by the RDS name. If you wish to erase
your selected name you must clear the Program Number
and store the program again under the same Program
Number.