Filter
Top Products
53
Other Functions
Notification of the track
end and the disc end
(End Of Track/Disc)
This function gives an indication by a flashing message in
the display when there is very little remaining time to the
end of track durring playback, or to the end of disc during
recording.
Notification of the track end being
Playback–End of track
Notification of the disc end being
recorded–End of Disc
The time for this indication can be set both for the
remaining playback time of a track (factory setting of six
seconds), or for the remaining time on a disc during
recording (factory setting of three minutes).
1 Press MENU/NO twice.
“Setup menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until “End
Of Tr/Disc” appears in the display; press AMS or
YES.
3 Turn AMS (or press ./> repeatedly) to “On”
for notification, “Off” for no notification; press AMS
or YES.
4 Press MENU/NO.
z To select the time for notification of the end of track
1 Press MENU/NO twice.
“Setup menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until
“EOT(Play)” appears in the display; press AMS or YES.
3 Turn AMS (or press ./> repeatedly) to select the
desired time from 6 to 20 seconds; press AMS or YES.
4 Press MENU/NO.
z To select the time of notification to end of disc during
recording
1 Press MENU/NO twice.
“Setup menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until “EOD
(Rec)” appears in the display; press AMS or YES.
3 Turn AMS (or press ./> repeatedly) to select the
desired time from three to ten minutes; press AMS or
YES.
4 Press MENU/NO.
Control terminal functions
Control terminal (CTRL-S)
—Mini-jack type
This recorder allows external control by connecting system
controller to the CTRL-S terminal as remote.
Control functions
The functions are the same as for the recorder’s remote.
Also, when a plug is inserted into the CTRL-S terminal, the
reception of infrared signals is stopped.